13mm Nylon Syringe Filters

13mm Nylon Syringe Filters Overview

Our nylon syringe filters are primarily used to filter small aqueous and organic samples with low hold-up volume in order to inject them directly into the HPLC sample loop systems. The filtered samples ensure column protection. Nylon membranes are also more economical than PTFE membranes, when applied to filtration of organic solvents, such as in HPLC mobile phase particle removal. Nylon membrane is not recommended for filtration of bacteria cultures, proteins, and other biologic samples, since sample loss due to absorption may occur.

13mm Nylon Syringe Filters Specifications

Diameter	13mm
Holdup volume (uL)	< 10
Filtration area (cm 2 )	0.95
Weight	0.60
Dimensions(mm)	15.3*17.4
Sample volume (mL)	1 - 10
Hydrophilic or Hydrophobic	Hydrophilic
Maximum Operating Temperature	60 Degrees Celsius
Maximum Operating Pressure	110psi
Sterilization	Non-sterile
Sterilization Method	Autoclaving (121 Degrees Celsius)
Inlet Connection	Female luer lock
Outlet Connection	Male slip luer
Housing material	Polypropylene
pore Sizes range(um)	0.1-5.0
pH	3 - 14

13mm Nylon Syringe Filters Features