| |
|
|
View Larger
|
|
Ambient Particulate Profiler
212
The Ambient Particulate Profiler from Met One has simplified the process of profiling aerosol particulates. This Aerocet 212 model sizes and counts particles into eight digital bins and reports on command.
|
|
|
|
|
|
|
|
Ambient Particulate Profiler Overview Dust Particle Monitor
The Model 212 Ambient Particulate Profiler, also known as the Aerocet 212, is a remarkably flexible dust particle monitor that features eight real-time channels and depending on the model 212-1 or 212-2, a range of particle sizing from .3 to 10 microns. Any particles above 10 microns are counted as 10 microns. The 212-1 model dust particle monitor also has an extended life Laser Diode that can provide 30,000 hours of life.Ambient Particulate Profiler Specifications
| Measurement Principle |
Optical, Light Scatter using a Laser Diode |
| Flow Rate |
1.0 LPM |
| 212-1 Measuring Ranges |
0.5 to 10 microns (eight sizes are selectable) |
| 212-2 Measuring Ranges |
0.3 to 10 microns (eight sizes are selectable) |
| Concentration |
up to 9,000,000 particles per cubic feet |
| Sample Flow Rate |
1 LPM |
| Sample Interval |
1 - 60 seconds |
| Accuracy |
+ / - 10% to calibration aerosol |
| Communication |
RS232 Output |
| Power |
12 VDC 240 mA maximum Inlet Heater, additional 750 mA |
| 212-1 Temperature |
0 to 70+ Degrees Celsius |
| 212-2 Temperature |
0 to 40+ Degrees Celsius |
| Weight |
3 lb (1.2 kg) |
| Size |
Diameter 4.0 inches, Length 7.5 inches plus 12 inches for inlet tube |
| Included Software Options |
Real Time Datalogging and Graphing, Remote Operation |
Ambient Particulate Profiler Design The Aerocet 212 dust particle monitor uses a laser-diode based optical sensor to detect, size and count particles. This information is then output as particles per size range. The two models available, 212-1 and 212-2, have measuring ranges starting from 0.3 microns to 10 microns, depending on the model.Ambient Particulate Profiler Features
- Eight Real Time Channels Available
- Low Power
- .5 microns to 10 microns range
- Easy to Operate
- Self-Contained
- Low Power and Low Cost
- Weatherproof
|
Particle Instrumentation
Dependable Aerosol Particle Measurement
Regulatory personnel at the federal, state, and local level, as well as cleanroom managers and OSHA/NIOSH personnel rely on New Star Environmental for dependable particle measurement equipment. Our equipment meets all international standards for GIS and ISO standards for cleanrooms, and can be retrofitted to convert existing PM10 inlets to PM2.5 inlets. Plus, every piece of equipment is backed by 60 years of industry experience. So, when you need quality products and expert guidance, you need New Star.
Back to Particle Instrumentation
|
|
|
|
